Cisco Knowledgebase Blog http://www.ciscoknowledgebase.com/ Cisco Knowledge | Tips | Tricks | FAQ | HOWTO | Documentation - From actual Cisco users and real life experience. en 2007-06-06T12:29:08-06:00 How do I reset a CP-7940 or CP-7960 to factory default? http://www.ciscoknowledgebase.com/how_do_i_reset_a_cp-7940_or_cp-7960_to_factory_default.html This will describe how to Reset the Cisco CP-7940 and CP-7960 IP Phones to the Factory Default. This procedure assumes that you do not know the unlock password as there is another procedure for resetting a phone if you do know the unlock password.

]]> ciscokb 2007-06-06T12:29:08-06:00 How do I unlock a Cisco CP-7960 running SIP software? http://www.ciscoknowledgebase.com/how_do_i_unlock_a_cisco_cp-7960_running_sip_software.html Product: Cisco CP-7960 and CP-7960G

In SIP releases 4.2 and later, an Unlock Config item displays in the phone settings menu. When you select Unlock Config, you are prompted to enter a phone password. When the correct password is entered, the configuration is unlocked and the settings can be changed. When the Network Configuration or SIP Configuration menus display, the lock icon in the upper-right corner of the LCD indicates an unlocked state. The unlocked symbol indicates that you can modify the network and SIP configuration settings. When the Settings menu is exited, the phone automatically relocks the configuration.

]]> Main ciscokb 2007-06-06T12:10:31-06:00 What are the power cord options for Cisco Aironet 1500 Access Points? http://www.ciscoknowledgebase.com/what_are_the_power_cord_options_for_cisco_aironet_1500_access_points.html The Cisco Aironet 1500 series outdoor mesh access points support the following AC power cord options.

•15-ft (4.6-m) power cord (AIR-CORD1500-15NA) for use in the US and Canada.

]]> Main ciscokb 2007-06-05T17:18:30-06:00 What is the difference between a Cisco WS-C2948G and a WS-C2948G-L3? http://www.ciscoknowledgebase.com/what_is_the_difference_between_a_cisco_ws-c2948g_and_a_ws-c2948g-l3.html We often get asked what the difference is between a Cisco WS-C2948G-L3 and a WS-C2948G. The most obvious is the L3 on the end of that part number. But what exactly does L3 mean?

]]> Main ciscokb 2007-06-05T10:57:22-06:00 How do I upgrade the software on a WS-SVC-IDSM-2? http://www.ciscoknowledgebase.com/how_do_i_upgrade_the_software_on_a_ws-svc-idsm-2.html This procedure will detail the steps involved in upgrading the software on a Cisco WS-SVC-IDSM-2 using a Cisco 6500 or 7600 series switch with a SUP-720 running in native mode.

]]> Main ciscokb 2007-02-05T15:32:17-06:00 How to upgrade the software on a Cisco WS-SVC-FWM-1 http://www.ciscoknowledgebase.com/how_to_upgrade_the_software_on_a_cisco_ws-svc-fwm-1.html This procedure describes the steps required to upgrade the Application, Maintenance and PDM software on the Cisco WS-SVC-FWM-1.

]]> Main ciscokb 2007-02-01T13:03:23-06:00 How do I reset password on a AIR-BR342 running 8.65 or earlier http://www.ciscoknowledgebase.com/how_do_i_reset_password_on_a_air-br342_running_865_or_earlier.html This articles describes the procedure for resetting / upgrading a Cisco AIR-BR342

Model: AIR-BR342
Console Cable: straight through cable

]]> Main ciscokb 2006-02-14T12:19:36-06:00 How do I reset the password on a Cisco WS-C3550-48-SMI? http://www.ciscoknowledgebase.com/how_do_i_reset_the_password_on_a_cisco_ws-c3550-48-smi.html This articles describes the procedure for resetting / recovering the password on a Cisco Catalyst WS-C3550-48-SMI.

]]> Main ciscokb 2005-11-17T14:21:02-06:00 What is the difference between a AIR-PWRINJ and a AIR-PWRINJ3? http://www.ciscoknowledgebase.com/what_is_the_difference_between_a_air-pwrinj_and_a_air-pwrinj3.html While both the AIR-PWRINJ and AIR-PWRINJ3 are listed as Aironet power injectors, they don't support the same Aironet radios.

]]> Main ciscokb 2005-10-31T16:17:33-06:00 What is the difference between a WIC-1DSU-T1 and a WIC-1DSU-T1-V2? http://www.ciscoknowledgebase.com/what_is_the_difference_between_a_wic-1dsu-t1_and_a_wic-1dsu-t1-v2.html We often get asked by our customers what the difference is between a WIC-1DSU-T1 and a WIC-1DSU-T1-V2 T1 Wan Interface Card for Cisco routers.

]]> Main ciscokb 2005-10-28T16:40:13-06:00 What are the requirements to upgrade to a SUP720? http://www.ciscoknowledgebase.com/what_are_the_requirements_to_upgrade_to_a_sup720.html We recently upgraded one of our Supervisor 2 Engines on our Catalyst 6509 Switch to a Supervisor 720. We thought it would be a simple upgrade but quickly realized it wouldn't be that simple.

]]> Main ciscokb 2005-10-26T11:21:16-06:00 How do I recover from a bad image on a Cisco WS-X4232-L3? http://www.ciscoknowledgebase.com/how_do_i_recover_from_a_bad_image_on_a_cisco_ws-x4232-l3.html This article describes the process required to recover a Cisco WS-X4232-L3 Catalyst 4000 module due to a missing or corrupted system IOS image.

]]> Main ciscokb 2005-10-19T15:22:27-06:00 What is the procedure for upgrading a WS-X6K-S1A-MSFC2 to the lastest software? http://www.ciscoknowledgebase.com/what_is_the_procedure_for_upgrading_a_ws-x6k-s1a-msfc2_to_the_lastest_software.html Follow these procedures to ensure that a WS-X6K-S1A-MSFC2 is running the latest code on both the Supervisor 1 and the MSFC2 router feature card.

]]> Main ciscokb 2005-10-05T14:37:25-06:00 How do I switch console between a Catalyst 6500 Supervisor Engine and an MSFC or MSFC2? http://www.ciscoknowledgebase.com/how_do_i_switch_console_between_a_catalyst_6500_supervisor_engine_and_an_msfc_or_msfc2.html A Supervisor engine on a Cisco Catalyst 6500 Series can run router software if an MSFC or MSFC2 feature card is installed. Each card (the supervisor and msfc card) have their own console port used to configure each card.

]]> Main ciscokb 2005-10-05T12:11:43-06:00 How do I set the system boot variable on a Catalyst 6500 Switch? http://www.ciscoknowledgebase.com/how_do_i_set_the_system_boot_variable_on_a_catalyst_6500_switch.html If you upgraded or modified the software on a Cisco Catalyst 6500 series switch or more specifically a Sup1 or Sup2 supervisor engine, you need to modify the system boot variable.

]]> ciscokb 2005-10-05T12:06:10-06:00