This will describe how to Reset the Cisco CP-7940 and CP-7960 IP Phones to the Factory Default. This procedure assumes that you do not know the unlock password as there is another procedure for resetting a phone if you do know the unlock password.

Product: Cisco CP-7960 and CP-7960G

In SIP releases 4.2 and later, an Unlock Config item displays in the phone settings menu. When you select Unlock Config, you are prompted to enter a phone password. When the correct password is entered, the configuration is unlocked and the settings can be changed. When the Network Configuration or SIP Configuration menus display, the lock icon in the upper-right corner of the LCD indicates an unlocked state. The unlocked symbol indicates that you can modify the network and SIP configuration settings. When the Settings menu is exited, the phone automatically relocks the configuration.

The Cisco Aironet 1500 series outdoor mesh access points support the following AC power cord options.

•15-ft (4.6-m) power cord (AIR-CORD1500-15NA) for use in the US and Canada.

We often get asked what the difference is between a Cisco WS-C2948G-L3 and a WS-C2948G. The most obvious is the L3 on the end of that part number. But what exactly does L3 mean?

This procedure will detail the steps involved in upgrading the software on a Cisco WS-SVC-IDSM-2 using a Cisco 6500 or 7600 series switch with a SUP-720 running in native mode.

This procedure describes the steps required to upgrade the Application, Maintenance and PDM software on the Cisco WS-SVC-FWM-1.

This articles describes the procedure for resetting / upgrading a Cisco AIR-BR342

Model: AIR-BR342
Console Cable: straight through cable

This articles describes the procedure for resetting / recovering the password on a Cisco Catalyst WS-C3550-48-SMI.

While both the AIR-PWRINJ and AIR-PWRINJ3 are listed as Aironet power injectors, they don't support the same Aironet radios.

We often get asked by our customers what the difference is between a WIC-1DSU-T1 and a WIC-1DSU-T1-V2 T1 Wan Interface Card for Cisco routers.

We recently upgraded one of our Supervisor 2 Engines on our Catalyst 6509 Switch to a Supervisor 720. We thought it would be a simple upgrade but quickly realized it wouldn't be that simple.

This article describes the process required to recover a Cisco WS-X4232-L3 Catalyst 4000 module due to a missing or corrupted system IOS image.

Follow these procedures to ensure that a WS-X6K-S1A-MSFC2 is running the latest code on both the Supervisor 1 and the MSFC2 router feature card.

A Supervisor engine on a Cisco Catalyst 6500 Series can run router software if an MSFC or MSFC2 feature card is installed. Each card (the supervisor and msfc card) have their own console port used to configure each card.

If you upgraded or modified the software on a Cisco Catalyst 6500 series switch or more specifically a Sup1 or Sup2 supervisor engine, you need to modify the system boot variable.

You've added an MSFC2 router feature card to a WS-X6K-SUP1A-2GE supervisor engine and it does not recognize it.

This procedure describes the process for upgrading a Cisco 6500 Catalyst Switch w/ a WS-X6K-SUP1A-2GE supervisor engine to ver 8.7.6-14 CAT OS.

This procedure will erase the password on a Cisco LDIR-416 LocalDirector 416.

This procedure describes the basics for installing dual redundant supervisor engines in a Cisco Catalyst WS-C6509 switch.

We've had many clients ask us about the dreaded "cisco vpn error 412" when using Cisco VPNs.

This procedure will reset the password on a Cisco PIX-501 Firewall to default settings.

This procedure will set a Cisco WS-C2948G Switch to AutoBoot from ROMMON mode.

This procedure will remove the password and set a Cisco WS-C3524-XL-EN Switch to default settings.

This procedure will remove / recover the password on a Cisco CSS-11051-AC Content Services Switch.

This procedure will upgrade the IOS on a Cisco 2620 Router.

This procedure will reset a Cisco ATA-186 to default settings.

This procedure will reset a Cisco 2620 Router to default settings. It will also recover a lost password. Note that you will loose any configuration the router has stored in flash.

We are technology company who specializes in the integration of Cisco hardware for small to large clients worldwide. As you can well imagine, we have come across a few tips and tricks while installing and running Cisco devices.